If you have made a recent JLab earbud purchase, you will need to pair them with your Bluetooth device before using them. If you cannot decipher the instructions from the manual included with the earbuds, we are here to provide help.
Connecting Jlab Earbuds: Enable Pairing Mode
Before connecting the earbuds with any device, you need to put the earbuds in pairing mode. Pairing mode enables the earbuds to be discoverable on different devices and also disconnects them from any devices priorly paired with the earbuds. The process has some differences based on whether you have the True wireless earbuds or the JLab earbuds.
1 Connecting Jlab Earbuds: Enable Pairing Mode1.1 Method#1: Enable Pairing Mode for True Wireless Earbuds1.2 Method#2: Enable Pairing Mode for JLab Wireless Earbuds2 How to Connect JLab Earbuds With Different Devices2.1 Method #1: Pairing with An Android Device2.2 Method #2: Pairing with an iPhone2.3 Method #3: Pairing with Devices Using Windows2.4 Method #4: Pairing with Mac Devices2.5 Method #5: Pairing with Smart TVs3 Troubleshooting Techniques in Case of Problems3.1 Method#1: Restart both devices3.2 Method#2: Disconnect Previously Connected Devices3.3 Method#3: Charge Your Earbuds3.4 Method#4: Reset the Earbuds3.5 Method#5: Contact JLab Support4 Conclusion
The True wireless earbuds are entirely wireless, while the wireless earbuds have a wire connecting the earpieces. The following steps can enable the respective pairing modes.
Method#1: Enable Pairing Mode for True Wireless Earbuds
Method#2: Enable Pairing Mode for JLab Wireless Earbuds
If you have the Wireless JLab earbuds, the following directions will put them in pairing mode. We have a similar article which explains Aftershokz pairing mode.
How to Connect JLab Earbuds With Different Devices
The JLab earbuds follow a different process to connect to devices based on the device itself. A step-by-step guide is provided for different categories to help you navigate the process.
Method #1: Pairing with An Android Device
Method #2: Pairing with an iPhone
The process is similar to pairing with an android device.
Method #3: Pairing with Devices Using Windows
Microsoft made the process of enabling Bluetooth on Windows very easy. The process is listed below. If you cannot locate the Bluetooth option, type it in the search bar, and the option will show up. Next, click on Bluetooth and repeat the above-mentioned steps to ensure the connection.
Method #4: Pairing with Mac Devices
Connecting to a Mac is different from pairing the earbuds with an iPhone. The process is as follows:
Method #5: Pairing with Smart TVs
Connecting your earbuds to televisions seems daunting, but the steps below will simplify it for you. They are categorized based on the brand you own.
Troubleshooting Techniques in Case of Problems
The process to connect your JLab earbuds is broken down above, but sometimes the outcome does not occur even after repeatedly connecting the device. The problem could either be with the device or your earbuds. If you face an issue like this, go through the following methods to troubleshoot the connection.
Method#1: Restart both devices
Turn off your earbuds and Bluetooth from the pairing device. Switch them back on after 30 seconds, and pair the two devices again. If there is a software glitch, this step will resolve it.
Method#2: Disconnect Previously Connected Devices
You will not be able to connect your JLab earbuds to a device if they are already connected to another device. Select Disconnect or remove the device from all devices before ensuring a connection with a new device. Then, reconnect and check if the pairing has occurred.
Method#3: Charge Your Earbuds
If the earbuds are out of power, they will not connect to any device. Instead, place the earbuds in their charging case and remove them when fully charged. The light indicator indicates that the earbuds will stop charging automatically when they are at maximum capacity.
Method#4: Reset the Earbuds
Select the Forget option on your Bluetooth device and place the earbuds back in their case. Tap the left earbud seven times rapidly until it blinks blue three times. Repeat the process with the right earbud. Take both earbuds out; one should flash white, and the other should blink white and blue. This indicates that they have been reset. if you would like more information on resetting headphones, we have an an article how to reset Beats Solo 3, which has a section on resetting any pair of bluetooth headphones.
Method#5: Contact JLab Support
If none of the aforementioned methods work, consider approaching JLab Support. The support section has a list of pre-answered questions to help with concerns. If the problem still needs to be resolved after you follow the instructions, you can email their support staff. All inquiries are answered within 24-48 hours.
Conclusion
Connecting JLab earbuds is a reasonably straightforward process, but it varies from device to device. If you cannot connect the earbuds, we hope this guide has helped you navigate the process smoothly. After the connection is made, you can enjoy your audio and videos without interruption.
